硝酸益康唑 CAS#:24169-02-6_深圳市艾宁泰科技有限公司

LOADING IMAGES

硝酸益康唑

CAS号	24169-02-6
规格	25kg/纸板桶（根据客户要求包装）	纯度	99%
货号	4447	货期	3天
品牌	艾宁泰	库存	360kg
规格	25kg/纸板桶（根据客户要求包装）
纯度	99%
货号	4447
货期	3天
品牌	艾宁泰
库存	360kg
注意：请务必与卖家联系核实单价库存，以确保您的资金安全及交易顺利。
参考价：￥1.00 元/公斤

立即询盘

货号	品牌	纯度	规格	参考价	货期
4447	艾宁泰	99%	25kg/纸板桶（根据客户要求包装）	￥1.00元/公斤	3天

产品详情

详细信息(中文)：
硝酸益康唑厂家直销
英文名称：Econazole nitrate
中文别名：益康唑、氯苯甲氧咪唑、氯苯咪唑、氯苯咪唑硝酸盐、双氯苯咪唑硝酸盐、双氯甲氧苯咪唑、癣敌
CAS 号：24169-02-6;68797-31-9
分子式：C18H16Cl3N3O4
分子量：444.7
含量：99%
熔点: 163 ～167℃
级别：医药级
包装：25KG/纸板桶
EINECS号：246-053-5
性状：白色结晶粉末
相关类别：医药中间体;医药原料;解热镇痛类;小分子抑制剂;抗病毒抗感染类
化学性质：白色或微黄色的结晶或结晶性粉末，无臭。抗真菌药。
用途：用于皮肤念珠菌病的治疗；亦可用于治疗体癣、手癣、股癣、足癣、花斑癣等。
【产品规格】25公斤/桶【产品保质期】2年【产品贮藏】密闭、阴凉处保存

检查
酸度取该品1g，加水50ml，在70℃水浴中加热5 分钟，立即放冷，滤过，滤液依法测定（附录Ⅵ H），pH值应为3.0 ～4.5。干燥失重取该品，在105 ℃干燥至恒重，减失重量不得过0.5 %（附录Ⅷ L）。炽灼残渣取该品1.0g，依法检查（附录Ⅷ N），遗留残渣不得过0.1 %。重金属取炽灼残渣项下遗留的残渣，依法检查（附录Ⅷ H第二法），含重金属不得过百万分之二十。
有关物质取该品，加甲醇制成每1ml 中含20mg的溶液，作为供试品溶液；精密量取适量，加甲醇稀释成每1ml 中含100μg的溶液，作为对照溶液。照薄层色谱法（附录Ⅴ B）试验，吸取上述两种溶液各25μl ，分别点于同一硅胶G薄层板上，以正己烷－－甲醇－浓氨溶液（60:30:10:1）为展开剂，展开后，晒干，熏以碘蒸气，供试品溶液所显的斑点颜色与对照溶液所显斑点比较，不得更深。

详细信息(英文)：
Econazole Nitrate Factory Direct
English name: Econazole nitrate
Chinese aliases: Econazole, chlorobenzimidazole, clozabendazole, clozabazole nitrate, dichlorobenzimidazole nitrate, diclofenac, destructive
CAS No.: 24169-02-6; 68797-31-9
Molecular formula: C18H16Cl3N3O4
Molecular weight: 444.7
Content: 99%
Melting point: 163 to 167°C
Level: Pharmaceutical grade
Packing: 25KG/cardboard drum
EINECS number: 246-053-5
Property: White crystalline powder
Related categories: pharmaceutical intermediates; pharmaceutical raw materials; antipyretic analgesics; small molecule inhibitors;
Chemical properties: white or yellowish crystalline or crystalline powder, odorless. Antifungal drugs.
Uses: For the treatment of cutaneous candidiasis; can also be used to treat body tinea, tinea capitis, tinea cruris, tinea pedis, tinea versicolor and so on.
[Product specification] 25kg/barrel [Product shelf life] 2 years [Product storage] Sealed, cool place

an examination
Acidity Take 1g of the product, add 50ml of water, and heat in a water bath at 70°C for 5 minutes. Immediately cool and filter. The filtrate is determined according to law (Appendix VI H). The pH value should be 3.0 to 4.5. Loss on drying Take this product and dry it at 105 °C to constant weight. The loss weight should not exceed 0.5% (Appendix VIII L). Residue on ignition Take this product 1.0g, check according to the law (Appendix VIII N), leaving no residue left over 0.1%. Heavy metal Take residue left under the residue of ignition residue and check it according to law (Appendix VIII H, second law). The heavy metal content shall not exceed 20 parts per million.
Related substances Take this product, add methanol to make a solution containing 20mg per 1ml as the test solution; take precise amount and dilute it with methanol to a solution containing 100μg per 1ml as a control solution. According to the thin layer chromatography (Appendix V B) test, 25 μl of each of the above two solutions was pipetted and spotted on the s