欢迎来到化学加!萃聚英才,共享化学!化学加,加您更精彩!客服热线:400-8383-509

化学加_合成化学产业资源聚合服务平台

020-29116152

(工作日8:30-18:00)

图片加载中
LOADING IMAGES
氟化铝

氟化铝

CAS号 7784-18-1
规格 25KG/袋1
纯度 ≥99
货号 5
货期 1天
品牌 Yingke
库存 100ton
注意:请务必与卖家联系核实单价库存,以确保您的资金安全及交易顺利。
参考价: 需询盘
货号 品牌 纯度 规格 参考价 货期
5 Yingke ≥99 25KG/袋1 需询盘 1天

产品详情

详细信息(中文):
中文名 氟化铝 英文名 Aluminum fluoride 别名 氟化 氟化鋁 氟化铝 三氟化铝 无水氟化铝 氟化铝(无水) 英文别名 fluoridhlinity Aluminum fluoride ALUMINUM FLUORIDE Aluminiumfluoride1 Aluminium fluoride ALUMINIUM FLUORIDE Aluminum trifluoride ALUMINIUM FLUORIDE H Aluminiumfluoridetech ALUMINIUM TRIFLUORIDE ALUMINUM(III) FLUORIDE Aluminiumfluorideanhydrous Aluminum fluoride monohydrate CAS 7784-18-1 EINECS 232-051-1 化学式 AlF3 分子量 83.98 InChI InChI=1/Al.3FH/h;3*1H/q+3;;;/p-3 密度 3.1 g/mL at 25 °C (lit.) 熔点 1290 °C (lit.) 沸点 1291 °C 闪点 1250°C 水溶性 SLIGHTLY SOLUBLE 溶解度 Sparingly soluble in acids and alkalies. Insoluble in Acetone. 敏感性 Hygroscopic 外观 powder 比重 2.882 颜色 White to light gray Merck 14,339 暴露限值 ACGIH: TWA 2.5 mg/m3NIOSH: IDLH 250 mg/m3; TWA 2 mg/m3; TWA 2.5 mg/m3 物化性质 白色三斜晶体或粉末。 难溶于水、酸及碱溶液,不溶于大部分有机溶剂,也不溶于氢氟酸及液化氟化氢。 产品用途 用作非铁金属的熔剂,用于陶瓷、搪瓷、炼铝等工业 危险品标志 Xn - 有害物品 有害物品 T - 有毒物品 有毒物品 Xi - 刺激性物品 刺激性物品 风险术语 R22 - 吞食有害。 R36/37/38 - 刺激眼睛、呼吸系统和皮肤。 安全术语 S26 - 不慎与眼睛接触后,请立即用大量清水冲洗并征求医生意见。 S37/39 - 戴适当的手套和护目镜或面具。 危险品运输编号 3260 WGK Germany 1 RTECS BD0725000 TSCA Yes 海关编号 28261210 Hazard Note Highly Toxic/Irritant Hazard Class 8 Packing Group III 上游原料 氟氢酸 硫酸 氢氧化铝 下游产品 四氟铝酸钾 氟化铝(无水) - 性质 开放数据 可信数据 白色砂状粉末。无水氟化铝的化学性能非常稳定,760mm压力下升华温度为1272℃。溶于水,25℃时溶解度 0. 559g/lOOmL。300~400℃过热蒸汽可使氟化铝水解。与碱金属能发生剧烈反应。 最后更新:2022-01-01 09:06:33 氟化铝(无水) - 制法 开放数据 可信数据 氢氟酸与氢氧化铝在高温下发生反应,得到三水合氟化铝,再经煅烧脱水得无水氟化铝。或者以萤石、硫酸和氢氧化铝为原料制各氟化铝。 最后更新:2022-01-01 09:06:33 氟化铝(无水) - 用途 开放数据 可信数据 主要用作铝电解的助熔剂、陶瓷上釉、催化剂和非铁金属冶炼的熔剂等。 最后更新:2022-01-01 09:06:34 氟化铝(无水) - 安全性 开放数据 可信数据 水解产物氟化氢有刺激性,可引起眼睛、呼吸道黏膜刺激症状,严重者可发生支气管炎、肺炎,甚至产生反射性窒息。贮存于阴凉、通风的库房。包装密封。应与酸类、食用化学品分开存放,切忌混贮。
详细信息(英文):
Name Aluminum fluoride Synonyms fluoridhlinity Aluminum fluoride ALUMINUM FLUORIDE Aluminiumfluoride1 Aluminium fluoride ALUMINIUM FLUORIDE Aluminum trifluoride ALUMINIUM FLUORIDE H Aluminiumfluoridetech ALUMINIUM TRIFLUORIDE ALUMINUM(III) FLUORIDE Aluminiumfluorideanhydrous Aluminum fluoride monohydrate CAS 7784-18-1 EINECS 232-051-1 InChI InChI=1/Al.3FH/h;3*1H/q+3;;;/p-3 Aluminum fluoride - Physico-chemical Properties Molecular Formula AlF3 Molar Mass 83.98 Density 3.1 g/mL at 25 °C (lit.) Melting Point 1290 °C (lit.) Boling Point 1291 °C Flash Point 1250°C Water Solubility SLIGHTLY SOLUBLE Solubility Sparingly soluble in acids and alkalies. Insoluble in Acetone. Appearance powder Specific Gravity 2.882 Color White to light gray Exposure Limit ACGIH: TWA 2.5 mg/m3NIOSH: IDLH 250 mg/m3; TWA 2 mg/m3; TWA 2.5 mg/m3 Merck 14,339 Sensitive Hygroscopic Physical and Chemical Properties Character White triclinic crystal or powder. The relative density is 2.882(25 ℃) The solubility is difficult to dissolve in water, acid and alkali solution, insoluble in most organic solvents, and insoluble in hydrofluoric acid and liquefied hydrogen fluoride. Use Used as a flux for non-ferrous metals, used in ceramic, enamel, aluminum and other industries Aluminum fluoride - Risk and Safety Risk Codes R22 - Harmful if swallowed R36/37/38 - Irritating to eyes, respiratory system and skin. Safety Description S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection UN IDs 3260 WGK Germany 1 RTECS BD0725000 TSCA Yes HS Code 28261210 Hazard Note Highly Toxic/Irritant Hazard Class 8 Packing Group III Aluminum fluoride - Upstream Downstream Industry Raw Materials Sodium carbonate Fluorosilicic acid Hydrofluoric Acid Sulfuric acid Hydrofluoric Acid Aluminum hydroxide Calcium fluoride Aluminum fluoride - Nature Open Data Verified Data white sand powder. The chemical properties of anhydrous aluminum fluoride are very stable, and the sublimation temperature is 1272 under the pressure. Soluble in water, 25 ° C solubility of 0. 559G/lOOmL. 300~400 deg C superheated steam can make aluminum fluoride hydrolysis. The reaction with the alkali metal can occur vigorously. Last Update:2022-01-01 09:06:33 Aluminum fluoride - Preparation Method Open Data Verified Data The hydrofluoric acid reacts with aluminum hydroxide at a high temperature to obtain aluminum fluoride trihydrate, which is then calcined and dehydrated to obtain anhydrous aluminum fluoride. Alternatively, each aluminum fluoride may be prepared from fluorite, sulfuric acid, and aluminum hydroxide. Last Update:2022-01-01 09:06:33 Aluminum fluoride - Use Open Data Verified Data It is mainly used as a flux for aluminum electrolysis, ceramic glazing, catalyst and flux for non-ferrous metal smelting. Last Update:2022-01-01 09:06:34 Aluminum fluoride - Safety Open Data Verified Data hydrogen fluoride hydrolysate is irritating, can cause eyes, respiratory tract mucosa irritation symptoms, severe cases can occur bronchitis, Pneumonia, and even produce reflex asphyxia. Store in a cool, ventilated warehouse. The packaging is sealed. Should be stored separately with acids, edible chemicals, avoid mixed storage. Last Update:2022-01-01 09:06:34 Aluminum fluoride - Reference Information sublimation point 1250°C NIST chemical information information provided by: webbook.nist.gov (external link) EPA chemical substance information information provided by: ofmpeb.epa.gov (external link) Overview aluminum fluoride is a colorless crystalline powder or a white crystalline powder, soluble in water and hydrofluoric acid, insoluble in other solvents, even with concentrated sulfuric acid heated to smoke, still does not react. The anhydrate is very stable and does not decompose upon heating until sublimation. It is mainly used as a regulator and flux in the process of aluminum electrolysis. As a regulator, the conductivity of the electrolyte can be improved, and aluminum fluoride can be supplemented according to the analysis results to adjust the composition of the electrolyte and maintain the specified electrolyte molecular ratio; As a flux, the melting point of alumina can be reduced to facilitate the electrolysis of alumina, control the heat balance of the electrolysis process, and reduce the energy consumption of the electrolysis process. In addition, it can also be used as a catalyst in the synthesis of organic compounds and organic fluorine compounds, ceramic and enamel flux and glaze composition, Lens, prism refractive index improvement agent, for the production of infrared spectrum "light loss" small fluorinated glass, can also be used in the alcohol production process as an inhibitor. preparation method 1. The wet method uses acid grade fluorescent powder, concentrated sulfuric acid and aluminum hydroxide as raw materials, and first absorbs the hydrogen fluoride gas generated by the reaction of acid grade fluorescent powder and concentrated sulfuric acid with water to obtain water and hydrofluoric acid with a content of 30%, the liquid-solid mixed phase reaction is then carried out with aluminum hydroxide to obtain a supersaturated aluminum fluoride solution, which is subjected to crystallization, filtration, and high-temperature calcination dehydration to finally obtain an aluminum fluoride product. The chemical reaction equation is as follows: CaF2 + H2SO4 → CaSO4 + 2HF + 3HF + Al(OH)3 → AlF3 · 3 H2OAlF3 · 3H2O → AlF3 + 3H2O in the process of preparing 30% hydrofluoric acid, impurities in hydrogen fluoride gas are also inhaled into the solution, the hydrofluoric acid contains more sulfuric acid, phosphoric acid, fluosilicic acid, sulfurous acid and other impurities. These impurities may cause side reactions with aluminum hydroxide. The resulting product is mixed in the aluminum fluoride crystals by adsorption or crystallization, which greatly affects the quality of the final product. At the same time, since the crystal water is removed from the crystal during the later calcination and dehydration treatment, the crystal lattice is broken and the particle size is reduced, so that the bulk density of aluminum fluoride is low (0.7g/cm3), the final water content of the product was also higher (≥ 3%). 2. The dry process, like the wet process, also uses acid grade fluorescent powder, concentrated sulfuric acid and aluminum hydroxide as raw materials. The difference is that the hydrogen fluoride gas generated in the first step of the process flow is subjected to a gas phase purification system, the contained dust and sulfuric acid were removed, and then mixed with dry aluminum hydroxide (water content 12%) and fed to a double-layer fluidized bed to complete the two-step reaction of roasting dehydration and fluorination, and finally an aluminum fluoride product was obtained. The chemical reaction equation is as follows: CaF2 + H2SO4 → CaSO4 + 2HF + 3HF + Al(OH)3 → AlF3 + 3H2O the process belongs to the second generation of aluminum fluoride production technology. After simple dust removal and acid removal, hydrogen fluoride gas (90%) is used to react with aluminum hydroxide, The hydrogen fluoride gas impurity content is lower than that of the wet aluminum fluoride process. Moreover, in the dry aluminum fluoride reaction fluidized bed reactor, due to the high reaction temperature and the fast flow rate of the gas phase reactant, the gaseous impurities and water generate sulfuric acid, sulfurous acid, phosphoric acid and the like do not have sufficient time for a side reaction with aluminum hydroxide, and therefore the content of impurities in the final aluminum fluoride product is lower than that of wet aluminum fluoride. This method is the most widely used and the most mature technology in the production of aluminum fluoride in China. However, this process has the following disadvantages:(1) the discharge of sewage is relatively large, and the hydrofluoric acid and fluorosilicic acid contained in the sewage can not be comprehensively utilized, and can only be discharged into the sewage treatment station, the total treatment cost is high;(2) there are still some problems in the technical design, such as the complexity or unreasonable design of some processes and equipment, as a result, the operation and maintenance costs of the equipment in the actual production process are higher. 3. Anhydrous method the anhydrous preparation process of aluminum fluoride can be divided into two parts, namely, the preparation of anhydrous hydrogen fluoride and the fluorination of aluminum hydroxide. As with the wet aluminum fluoride and dry aluminum fluoride processes, the process is also based on acid grade fluorescent powder, concentrated sulfuric acid and aluminum hydroxide as raw materials. Different from the previous two methods, the crude hydrogen fluoride gas generated from the first two reaction materials in this process is subjected to a refining step of condensing and distilling into liquid anhydrous hydrogen fluoride with a purity of more than 99.9%. The reaction process of high purity hydrogen fluoride with aluminum hydroxide (water content 6%) in the circulating fluidized bed has almost no side reaction, which greatly reduces the impurity content of the final aluminum fluoride product. At the same time, due to the low water content of the aluminum hydroxide raw material itself, no additional calcination and dehydration process is needed before feeding, which reduces the possibility of Crystal fracture, it also makes the final product have the advantages of high bulk density (1.6g/cm3), low water content and so on. The chemical reaction equation is as follows: CaF2 + H2SO4 → CaSO4 + 2HF ↑,3HF + Al(OH)3 → AlF3 + 3H2O. This process is the third generation of preparation technology independently developed by domestic fluorine chemical enterprises in the early 21th century. Compared with the wet aluminum fluoride and dry aluminum fluoride process, it has the most excellent final product quality, which is the most advanced aluminum fluoride production technology in China. 4. Fluosilicic acid method fluosilicic acid method is also known as the phosphorus fertilizer by-product method. The method uses the fluorine-containing waste gas, silicon tetrafluoride and hydrogen fluoride, produced by the phosphate fertilizer production enterprise to prepare the fluosilicic acid solution after the second cycle absorption (Containing H2SiF6 15%, P2O5<0.25g/L), mixed with aluminum hydroxide slurry (Al2O3 dry basis ≥ 64%), and filtered the resulting Aluminum fluoride solution to remove silica gel precipitate, the aluminum fluoride filter cake was prepared by crystallization and centrifugal separation, and finally the final product was prepared by drying, calcination and dehydration. The chemical reaction equation is as follows: H2SiF6 +2Al(OH)3 → 2AlF3+2SiO2+4H2O,AlF3 · 3H2O → AlF3 + 3H2O. Although the above process is advanced, but the shortage is: (1) the process conditions are demanding, slightly not pay attention to the defective products; (2) large investment, such as Wengfu 14 kt/a Aluminum fluoride plant investment of 0.17 billion yuan; ③ Silicon element is not utilized, and SiO2 is discharged as slag; ④ The w(H2SiF6) of fluorosilicic acid is required to be greater than 18%, and low concentration fluorosilicic acid is not applicable. On this basis, a new process was developed: fluosilicic acid was reacted with ammonium bicarbonate to form ammonium fluoride solution and silica precipitate, which were separated, and then the filter cake was washed and dried to obtain white carbon black; the soluble α-AlF3 · 3H2O and ammonium chloride solution were obtained by the reaction of ammonium fluoride solution with aluminum chloride hexahydrate. Under suitable process conditions, the soluble α-AlF3 · 3H2O was converted into insoluble β-AlF3 · 3H2O, calcined aluminum fluoride product; After the separation of the solution after evaporation, crystallization, drying to ammonium chloride by-products. The chemical reaction formula is as follows: H2SiF6 +6NH4HCO3 → 6NH4F + SiO2 ↓ +6CO2 ++ 4H2OH2SiF6+2NH4HCO3 →(NH4)2SiF6+2CO2 ++ 2H2O(NH4)2SiF6+4NH4HCO3 → 6NH4F + SiO2 ↓ +4CO2 ++ 2H2O3NH4F + AlCl3 · 6H2O → α-AlF3 · 3H2O + 3NH4Cl +3H2Oα-AlF3 · 3H2O → β-AlF3 · 3H2O5. Direct thermal decomposition of ammonium ice slag (1) the ammonium ice slag after the treatment of removing impurities is directly thermally decomposed to prepare aluminum fluoride and recover ammonium fluoride. The process flow is as follows: Chemical reaction formula: SiO2 + 6HF → H2SiF6 +2H2OFe2O3 + 6HCl → 2FeCl3+3H2O(NH4)3AlF6 → AlF3 + 3NH4F the specific operation steps are: crushing ammonium ice slag evenly, add the appropriate amount of HF-HCl of the mixture, at room temperature ~ 80 deg C stirring 60~90min, the silicon and iron impurities and HF,HCl reaction to form soluble matter and insoluble ammonium ice slag separation, then filter and wash with clean water, the filter residue is baked at 120 ℃ for 1H, taken out to form powder, placed in a high temperature furnace, and heated at 500~800 ℃ for 40~60min, take out the cooling to produce aluminum fluoride, Ammonium fluoride, a by-product, can also be recovered during thermal decomposition. (2) Ammonium ice slag and aluminum hydroxide mixed thermal decomposition method the process flow of this method is as follows: Chemical reaction formula:(NH4)3AlF6 + Al(OH)3 → 2AlF3+3NH3+3H2O(NH4)3AlF6 → AlF3 + 3nh4f Nh3 + 2HF → NH4HF2NH4F + HF → NH4HF2 specific operation steps: the ammonium ice slag after impurity removal, or directly with ammonium fluoroaluminate (mass fraction ≥ 98%) Ammonium ice slag, after grinding, according to a certain ratio and aluminum hydroxide mixed evenly into the high temperature rotary kiln, at the appropriate temperature decomposition of 60~90min, cooling aluminum fluoride, ammonia and ammonium fluoride generated in the thermal decomposition process can be absorbed by hydrofluoric acid, and then concentrated and crystallized to recover ammonium fluoride as a by-product. (3) wet process ammonium ice slag reacts with aluminum hydroxide and sulfuric acid according to the stoichiometric ratio, drying and dehydration to obtain aluminum fluoride products. The process flow is as follows: Chemical reaction formula:(NH4)3AlF6 + Al (OH)3 · H2O +3H2SO4 → 2 AlF3 · 4H2O +3NH4HSO4 + 2H2O specific operation steps: mix ammonium ice slag with sulfuric acid for pulping, and screen through 60 mesh for refined pulping, aluminum hydroxide slurry was used as the primer, and the wet discontinuous synthesis method was used to inject the refining and pulping. During the reaction, the temperature was controlled at 80~95 ℃, and the acidity was 0.5~1g/l, the final acidity of the reaction was adjusted to pH = 2~4 with aluminum hydroxide, and the pH value did not change within 5min. The addition was stopped, stirring was continued for 1-20min, followed by filtration, washing, and drying of the ointment at 300-400 °c to obtain anhydrous aluminum fluoride. Application 1. Mainly used as regulator and flux in aluminum electrolysis process. As a regulator, aluminum fluoride can improve the conductivity of the electrolyte, and aluminum fluoride can be supplemented according to the analysis results to adjust the composition of the electrolyte and maintain the specified electrolyte molecule ratio; As a flux, aluminum fluoride can reduce the melting point of aluminum oxide, which is beneficial to the electrolysis of aluminum oxide, control the heat balance of the electrolysis process, and reduce the energy consumption of the electrolysis process. 2. It is used as a catalyst in the synthesis of organic compounds and organic fluorine compounds, a component of ceramic and enamel flux and glaze, a lens, a refractive index improver of Prism, and a fluorinated glass with small "light loss" in infrared spectrum. 3. Can be used as an inhibitor in the alcohol production process. as a flux for non-ferrous metals, can be used to prepare other aluminum fluoride in the production of aluminum as electrolytic bath components, to lower the melting point and improve the conductivity of the electrolyte. Also used in the production of alcohol as a fermentation inhibitor. Used as flux for the outer layer of glaze and enamel of ceramic ware, flux for non-ferrous metals. Used in welding fluids in metal welding. For the fabrication of optical lenses. It is also used as a catalyst for organic synthesis and a raw material for the synthesis of cryolite. used as a flux for non-ferrous metals, used in ceramic, enamel, aluminum and other industries widely used in the preparation of doped fluorinated glass and mixed metal fluoride catalysts for the synthesis of HFC-134a. solubility in water (g/100ml) grams dissolved per 100ml of water at different temperatures (℃): 0.56g/0 ℃;0.56g/10 ℃;0.67g/20 ℃;0.78g/30 ℃;0.91g/40 ℃; 1.1g/60 ℃;1.32g/80 ℃;1.72g/100 ℃ toxicity This product is toxic. Wash with water when touching the skin. Flush with warm water when invading into the eye. Ingestion poisoning with 2% calcium chloride gastric lavage, intravenous injection of calcium gluconate. During operation, wear work clothes, protective masks and latex gloves to prevent inhalation of aluminum fluoride dust. Production equipment should be closed and the workshop should be well ventilated. production method fluosilicic acid method 18% fluosilicic acid solution from phosphate fertilizer plant was heated to about 78 ℃, then it is added into the reactor to react with aluminum hydroxide at 100 ℃ to produce aluminum fluoride solution, and the hydrated silicic acid is removed by centrifugal separation. The filtrate enters the crystallizer and is kept at 90 ℃ for 3~5h to obtain aluminum fluoride trihydrate (AIF3 · 3H2O). Crystallization. After centrifugal separation, the aluminum trifluoride crystals (water content 5%) were dehydrated by two fluidized bed furnaces successively. The temperature of the first fluidized bed furnace was controlled at about 205 ℃, and most of the water was removed first, the total water content (including water of crystallization) of the aluminum trifluoride was reduced from about 45% to about 6%, and then the remaining water was removed in a second fluidized bed furnace controlled at a temperature of 590 to 600 °c. After dehydration, the material is cooled to obtain anhydrous aluminum fluoride product. The H2SiF6 +2AI(OH)3 → 2A1F3 + SiO2 +4 H2OAlF3 · 3H2O [Δ] → AlF3 + 3H2O aluminum hydroxide method aluminum hydroxide reacts with anhydrous hydrofluoric acid to produce aluminum fluoride trihydrate. Aluminum fluoride trihydrate is then crystallized, filtered, and dried (cauterized) for dehydration to produce an anhydrous aluminum fluoride product. AI(OH)3 + 3HF → AIF3 · 3 H2OAlF3 · 3H2O [Δ] → A1F3 + 3H2O category toxic substances toxicity grade high toxicity Acute toxicity oral-mouse LD50: 103 mg/kg stimulation data eye-rabbit 500 mg/24 h mild flammability hazard characteristics non-combustible; Toxic hydrogen fluoride gas emitted in case of acid; toxic fluoride and alumina fumes from heat storage and transportation characteristics The warehouse is ventilated and dried at low temperature; It is stored separately from acids and food additives fire extinguishing agent water, foam, sand, carbon dioxide Occupational Standard TLV-TWA 2 mg (aluminum)/m3; Tel 5 mg (fluoride)/M3 toxic substance data information provided by: pubchem.ncbi.nlm.nih.gov (external link)

产品百科查看更多

英文名 aluminium trifluoride
中文名 氟化铝
CAS号 7784-18-1 溶解性 SLIGHTLY SOLUBLE
分子量 87.00060 熔点 250°C
密度 3.1 g/mL at 25 °C(lit.) 沸点 1291 °C

商家信息

莹科新材料股份有限公司

营业执照已审核 企业已认证

联系人:尹柏利 点击这里给我发消息

号码一: 185****

号码二: 186****

VIP企业默认展示联系方式,非VIP企业仅限注册登录用户可见

  • 公司类型:生产厂
  • 成立时间:2004-02-16
  • 所在地区:河北省承德市
  • 注册资本:43400万元
推荐供应商

产品:氟化铝